It includes the allmoust lost art of engine turning.
I have never done it before and really wanted to try it out.
With the help of a friend and a lathe I made a test tool and had to see if it works in practice, and it did.
More to come soon.
17 mars 2013
Project Engine Turning
I have started a new project for one of my cars!
It includes the allmoust lost art of engine turning.
I have never done it before and really wanted to try it out.
With the help of a friend and a lathe I made a test tool and had to see if it works in practice, and it did.
This is the quick test part I did today on a piece of aluminum.
More to come soon.
It includes the allmoust lost art of engine turning.
I have never done it before and really wanted to try it out.
With the help of a friend and a lathe I made a test tool and had to see if it works in practice, and it did.
More to come soon.
Prenumerera på:
Kommentarer till inlägget (Atom)
remembered this from a long time back:
SvaraRaderahttp://scootermcrad.blogspot.co.uk/2009/09/art-of-engine-turning.html
http://scootermcrad.blogspot.co.uk/2011/09/engine-turning-again.html
Det där har vi provat i alla tider på Eskil MC. Man spetsar en vinkork på en borr och kör på carborundum på plåten. Men problemet är att korkjäveln alltid är borta så man måste börja med att svepa en påk innan man kan börja, och det är kanske därför resultatet ser ut som ragnar Skanåker med Parkinsons?
SvaraRadera/Fantomen